The Cisco Catalyst Compact Switches easily extend your Cisco Catalyst switching infrastructure outside the wiring closet to enable new workspaces, extend wireless LANs, and connect Power over Ethernet (PoE) devices. These fanless, small form-factor switches are ideal for space-constrained deployments where multiple cable runs would be challenging.
With increased bandwidth, double the PoE capacity, faster CPU, and more memory, the Cisco Catalyst 3560-CX and 2960-CX bring a multifold improvement in performance to the Cisco Catalyst Compact Switch product line. They offer many smart and innovative features for management, simplicity, and scale.
New features include:
– 8 or 12 Gigabit Ethernet ports with line-rate forwarding performance
– Gigabit copper Small Form-Factor Pluggable (SFP) or 10G SFP+ uplinks
– Power over Ethernet Plus (PoE+) support with up to 240W of PoE budget
– Advanced Layer 2 (LAN Base) and Layer 3 (IP Base) support with an option to upgrade to IP Services
– Perpetual PoE for powering a powered device even when the device is booting
– Cisco Catalyst Instant Access (optional with 10G) for management simplicity
– Network plug-and-play (PnP) support for automating device configuration
– Cisco TrustSec capability for role-based access security
– Innovative power management features, including Energy Efficient Ethernet and switch hibernation mode
– NetFlow Lite for application visibility at the access network
Upgrade Paths
Cisco Catalyst 3560-CX and 2960-CX Series Switches build upon the success of the 3560-C and 2960-C compact switches and offer superior performance and scale. They come in the same form factor as the older switches, and you can use them anywhere you used the older switches. Customers migrating to the new compact switches will benefit from the increased scalability and performance, innovative new features, and proven performance.
Spezifikationen
Switch type | Managed |
Switch layer | L2/L3 |
Quality of Service (QoS) support | Y |
Web-based management | Y |
Basic switching RJ-45 Ethernet ports quantity | 8 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Gigabit Ethernet (copper) ports quantity | 2 |
Installed SFP+ modules quantity | 2 |
Console port | RJ-45 |
Power connector | DC-in jack |
Networking standards | IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3ah,IEEE 802.3u,IEEE 802.3z |
10G support | N |
Copper ethernet cabling technology | 1000BASE-T,100BASE-T,10GBASE-T |
Full duplex | Y |
Link aggregation | Y |
Rate limiting | Y |
Spanning tree protocol | Y |
VLAN support | Y |
Number of VLANs | 4000 |
Switching capacity | 24 Gbit/s |
Forwarding rate | 17.9 Mpps |
Jumbo frames support | Y |
Jumbo frames | 9198 |
DHCP features | DHCP server |
IGMP snooping | Y |
Multicast support | Y |
Management protocols | Telnet, RIP, SNMP, NTP, TACACS+, RMON, HTTP, RADIUS |
Data link protocols | UDP, TFTP, IP, TCP, FTP |
Supported network protocols | ICMP, ARP, BOOTP, OSPF, DHCP |
Rack mounting | N |
Product colour | White |
LED indicators | Y |
Safety | UL 60950-1, CAN/CSA 22.2 No. 60950-1, EN 60950-1, IEC 60950-1, CE, GB 4943, IEC 60825 |
Certification | FCC, CE, CFR 47, EN 55022, EN 55024, AS/NZS, CISPR22:2004, EN55022, VCCI, KCC, ANATEL, CCC, GOST |
Internal memory | 512 MB |
Flash memory | 128 MB |
Mean time between failures (MTBF) | 569530 h |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Input current | 1.5 - 3.25 A |
Power consumption (typical) | 24.5 W |
Power over Ethernet (PoE) | Y |
Power over Ethernet plus (PoE+) ports quantity | 8 |
Total Power over Ethernet (PoE) budget | 124 W |
Operating temperature (T-T) | -5 - 45 °C |
Storage temperature (T-T) | -25 - 70 °C |
Operating relative humidity (H-H) | 5 - 95% |
Storage relative humidity (H-H) | 5 - 95% |
Operating altitude | 0 - 3048 m |
Non-operating altitude | 0 - 4000 m |
Heat dissipation | 648.3 BTU/h |
Width | 269 mm |
Depth | 238 mm |
Height | 44.4 mm |
Weight | 2.27 kg |